Japanese vintage axe. The brand is KIKUSUI. The chisel has been sharpened with #800 water stone. The cutting edge is 107m. The length is 390mm. The weight is g. I will combine the items to save some p

 

Japanese vintage axe head 2. The brand is unable to read. The blade is made from high carbon steel and laminated. The blade has been sharpened with #800 water stone. There is a hairline crack. The cut

 

EXTRA HEAVY EARLY BRASS PLUMB BOB 2LB. 2 OZ. THIS IS AN EXTRA HEAVY EARLY BRASS PLUMB BOB WEIGHING IN AT 2LB. 2 OZ. AND APROX. 6" LONG FROM TIP TO TIP. IT HAS NICE PATINA AND ALSO SOME VERY LIGHT SURF

 

ziggeystardust store VINTAGE MARPLES SET 152 CARVING TOOLS GOUGES CHISSELS FOR FINE DETAIL CARPENTRY I ONLY POST OUT ITEMS ON SATURDAYS AS I WORK LONG HOURS DURING THE WEEK. A VINTAGE MARPLES SET 152

 

This auction is for a Windsor Chair makers Plane. It's curved in it's length as well as it's width. I believe it's for hollowing out seats on chairs? It came from a Windsor chair makers estate along w

 

harris plane body is 14" long 3 1/4 wide cutter is angled 2 1/2 " wide 3/16" thick

 

jmills321 Store Antique PEXTO Brand Slating Hammer Roofing Tool With Leather Rings Handle. The sharp end of the tool looks very good, blunt end has lots of use. Overall condition is very good.

 

Good used working condition...The 10 CR has some overspray paint on one side that seems to come off with steel wool...Both pair work fine...They are not engraved with any owners names or initials...Th

 

In very good condition. Some bruising to heel and wedge.

 

Antique woodworking line scribe wood tool with brass clamp bolt measures 7" long by 1 1/8" wide with a 5/8" rabbet back out.