Offering a GRUNDIG MAJESTIC, Model 1088 US Tabletop Radio. Overall it's in decent shape, it has broken dial glass and has a large chip in the plastic which surrounds the glass. The radio powers, but t

 

JBL 2441 alnico large format driver similar to 376. A full restoration for cosmetics and performance. New paint as needed, rotted foam in back cap replaced, disassembled and cleaned. Magnetic surfaces

 

Pair used vintage UTC ER-578 transformers. Mil number TF4SX13YY 15K ohms C.T primary, 600 ohm split secondary. +/- 2db 200-600 CPS (?) catalog may have spec here:http://www.junkbox.com/electronics/utc

 

1 7119 / E182CC tube. Made in Holland. 1D0 Delta8G Made in July, 1958. Very rare D getter and Pinched glass. If you can see it in the pictures, it is pinched in the upper mid section. Looks like a roc

 

Up for bids is a quad of Westinghouse 6SN7GTB tubes. These tubes have a large top disc getter. Date codes are 63-22, 63-35, 66-13, 65-48. Tubes were tested on our calibrated TV-7D/U where 50/50 is the

 

This pair of new old stock Gulf Promotional AM Radios from the 1970's. These transistor radios are designed to look like Gulf Gas Station items. One looks like Gulf Pride Multi-G Motor Oil and the oth

 

magnamonster store vintage realistic minimus 7 tweeters with speaker inputs.from bookshelf speakers. working .shipping is 8.00

 

This is just the driver portion. I accidentally pulled the connector wires out of the main housing and had my local electronics repair shop fix these as best possible. He was able to reattach the wire

 

Up for sale is an AFTERMARKET needle for a GE VR-22 stereo cartridge.Box is open and written on, but the needle is never used. Needle is made in Europe.

 

This lot is exactly as shown in photo. Three long screws and 3 wood hole recess covers for Marantz wood cabinets that come in three pieces (top and two sides) commonly seen on receivers and tape decks