misc manufactures from 1" to 3"

 

Machinists measuring tool. Mitutoyo height gage with original box. 6"Adjusts smoothly. In good usable condition. Please check my auctions for more old and interesting tools. From Cape Cod Shops,Barns

 

Snap-On Wrenches, 7 total: 6 Combination OEX series sizes 17mm, 15mm, 11mm, 10mm, 9mm, 5/8" 1 Flare / open end RSX series 1/2" I was told these series were made from 1967 to 1987, please research if y

 

Includes the matching headstock, tool rest and tailstock from a small wood lathe. 3" center height. Small tapers for centers. Includes one threaded faceplate and tailstocks. PLEASE FEEL FREE TO CONTAC

 

Up for bid is a Rare Antique Dorpian Axe Head. It measures about 7-1/2" long and the blade is 4-1/2" wide, it weighs about 3 lbs. It is in very good condition and will last another 100 years. If you h

 

This Used Saw is in Great Condition for its Age The Wood doesn't have any cracks or splits The only parts missing are the 2 small pins that hold the Blade in place and 1 wing nut Approx Measurements;

 

Damascus Steel Hammer A triumph of Japanese blacksmithing "This attractive Damascus steel hammer proves that a highly sophisticated implement can be produced from mankind´s oldest tool, despite its a

 

Grovelodgeuk Store James Howarth firmer paring chisel, it is 1 1/4 inches wide. It is in good order with an octagonal boxwood handle which is free from cracks. The blade is stamped "JAMES HOWARTH SHEF

 

LARGE LOT OF (100) PLUS SCREWDRIVERS, DRIVERS, BITS - Flat Head, Phillips & More The Drivers range in size from 2" thru 13". There are Flat Head, Phillips, Awls, Bits and More. Makers Include: oth

 

No. 5 Hand Plane marked Gambles Artisan, this plane could use a little attention, rusty in areas but is a good plane. The first block plane is marked Millers Falls no. 56 in decent condition. The othe