As pictured you will receive one Vintage 19" Balsa wood hat form. It stands approx. 8.5" tall. It has seen some pins and some paint but still has a lot of life in it. It was used in the late 1950s to

 

There are 9 metal pulleys in this lot.The hole in the center of the pulleys are .672 (43/64) just about 11/16

 

Vintage Italian marble top counter P Uno Chilog balance scale The Details Vintage Italian marble top counter P Uno Chilog balance scale Measures approx. 14 1/4 inches 7 inches 6 inches I do not have a

 

Vintage Military Marine / Navy Counter Top Show Gun / Pistol Case Glass & Wood From part of an estate, etched glass looks to be oak wood came from Lemoore base in California has a antler in it, I

 

Featured is a very rare No 612 Henry Troemner Cream Testing scale. Made in Phila, PA, the galvanized scale has a 12-1/2" x 4" base, is 6-1/2" deep and 7-1/4" tall. Measuring from end to end of the rac

 

VINTAGE 21" BRASS LAW LIBERTY BALANCE SCALE ON MARBLE BASE W/ EAGLE LARGE ~THIS IS A LARGE BRASS? SCALE WITH AN EAGLE ON TOP ALSO HAS A HOLE TO PUT A LITTLE FLAG INTO MEASURES APPROX. 21" TALL BY 15 1

 

This is a Vintage Fairbanks Test weight Scale, using the Winchester Bushel System, Pat'd Dec. 15, 1877. The Original Hook is Missing, I have a Hook on it, that Hook is not a factor in the Scale. The B

 

Vintage Industrial / Mercantile STORAGE BIN / TOTE 18-1/2" by 12" by 5-7/8" deep precisely drilled hand-holds on each end thin rabbets along sides and bottom edges of boards, cover metal edges rusty c

 

A very nice steam Gauge made by, The Watson-Stillman Co. New York, N.Y. ... The Dial/face is very nice, It has not been Buffed, Polished, Scratched that I can tell. Looks like a silver/Nickle Dial/fac

 

VINTAGE WOOD HAT BLOCK FORM MILLINERY MOLD... There are no # on this wood mold The bottom measures 7” x 6 1/8” Height on the edge 3” and 3 3/8” in the center Circumference 21 inches. Very good