Normal 0 false false false EN-US JA X-NONE MORSE USN Mark V Diving Helmet non-return valve. Original MORSE brass diving helmet non-return valve. The valve is stamped MFD BY A. J. MORSE & SON INC.

 

This bell is well made and very heavy for its size. It is 16 pounds. I was told that this is from a Russian patrol craft. The characters "CK-154" are deeply engraved on the bell. Complete with the cla

 

THIS IS A VINTAGE MARITIME BRASS SHIP LIGHT COVER. IT HAS EXCELLENT PATINA AND IS IN GREAT CONDITION FOR ITS AGE. COVER MEASURES 6 1/2 inches tall and 4 inches in diameter. PLEASE SEE PICTURES BEFORE

 

This is a brass eyepiece for an antique telescope. It measures 2.5 cm in diameter at the side that would connect to the telescope. The eye side has a 3.6 cm diameter and the glass has about a 6mm diam

 

Vintage Ship Clock Brass with Metal Map w/Cities On the reverse side- 15 Jewels Swiss Made #1319407 & hand etched # CT030705038 It's 4" diameter. It's set on an angle as if to be in or on a dashbo

 

GRAY MARINE MOTOR CO. Detroit Michigan. Brass plaque with blue background, measures approx. 10" L x 1 1/2" H. Small surface scratches on brass and blue background, as well as general aging around the

 

This is an antique port hole. This was salvaged from a junk yard where we did an auction. It measures approx. 12 1/4" long x 8 1/4" wide. The glass measures approx. 9" long x 5" wide. It measures appr

 

ANTIQUE BRASS JOHN BLISS CO TAFFRAIL THE GLASS IS BROKEN AND THE DIALS DO NOT SPIN INCLUDES ALL SHOWN THE SPINNER HAS BEEN ATTACHED WITH WIRE AT SOME POINT IN TIME NOT ORIGINAL TO THE PIECE THANKS FOR

 

here is a nice very old hand blown glass fishing float. usually originate in the japan area but not marked. measures 11 in across and has a very large pontil. will ship world wide.

 

Antique Ornate Iron Pulley With Loop Hook iron wheel 4" 10" long good working condition this pulley was covered with grease which protected it from corrosion it needs a thorough "degreasing"