THIS IS A NICE BRASS CHAMPION 6 LEVER PANCAKE COLLECTIBLE PADLOCK LOOK IS IN GOOD SHAPE , NO KEY ABOUT 2 1/2 H 2 1/4 W THEY DON,T MAKE LOCKS LIKE THIS.
Here is a wonderful piece of antique cast iron machinery. This is a shoe sole press from the Hood Rubber Co. This is marked on the one side with HOOD RUBBER CO INC WATERTOWN MASS U.S.A. and on the oth
Large 14 " rosewood & brass spirit level by Atkin & Sons This unusual rosewood and brass level is a good clean example from Atkins.In very good condition, original fat clear bubble.14" long, 1
Craftsman Whitworth large open end wrench or spanner 1/2W X 9/16W (equates to about 15/16” X 1”). Over 10 1/2” long. Rare, vintage, large size; Hard-to-find size. Great for use on older British
Bob is marked K&E CO. N. Y. see photo three. This is a working bob with three types of metal. The very top is brass the top middle section looks like copper. The bottom middle is brass and the ver
>>True Antique Tool>> One 3/8" ATHA BOTTOM SWAGE. LAST ONE! NEVER BEEN USED! THE SHANK IS 1 1/16" WIDE. IF NEEDED, YOU CAN ALWAYS GRIND SOME OFF! **The shank end was sheared off uneven, no
SLEEK French "ACIER FONDU" Cross Peen Hammer... Here is a really neat forging hammer that is work ready.. This hammer is very well balanced and has a sleek profile, different and unique from any other
Smiths Washita Tool Sharpening Stone Hone Used condition but with lots of life left in this one.Cedar box is 8 9/16" long X 2 13/16" wide.The stone is 7 15/16" long X 2" Wide X 1" Thick.Comes with Kni