ONE NEW ASAHI SEIKO Card Dispenser. Model CD-1000 dispenses up to 1000 cardsof Credit Card size and thickness (52mm min -56mm max x79mm min-82mm max). Thickness 0.25mm - 0.75mm. Dispensing speed two s

 

1-3/4" Diameter Tin Pocket 'Thrift Bank' Features an Eagle on the front holding arrows in its beak and talons and a circle of olive branches on the back Considering how old this is I believe it's in p

 

You are bidding on a vintage (circa 1940's) Atlas Bantam 5 cent (nickel) peanut / gumball vending machine. Unfortunately, I do not have the key, but apparently at one point and time, the original owne

 

Vintage Pot Metal Dog (Retriever) Bank. Measures 5 1/2" long by 31/2" high. Screw in side opens bank.

 

Vintage 1930s FORD 1 cent gumball machine in good condition despite it's many years. Machine has original glass globe with no cracks, breaks or chips. Metal base has some slight surface loss as well a

 

US mailbox door ( Its an oldie ) Frame is 5 1/2 tall x 5 3/8 wide NO NUMBER ON GLASS WORKING COMBINATION Lever rusted will not allow lever to swivel (photo 9 ) frame has some warping (photo 7,8) 2 DIA

 

This is a CAST IRON Piggy Bank. It measures about 7 1/2" long from its nose to its tail and is about 3 5/8" tall. It is HEAVY Weighing 4 pounds !! It has its rubber stopper on the bottom.... It is VER

 

Vintage Cast Iron "Ole Puffer" Cigar Nickels Mechanical English Bull Dog Bank. Used. Just Pull down the tail, The neck retracks, and then the mouth will open for the coin! Approximately 8.75" Tall, 3"

 

OLD 1950's -60's-70's ? 10 cent per vend - gumball. l - 10 cent FORD LARGEER THAN NORMAL PLASTIC GLOBE GUMBALL MACHINE / PROJECT WORKING LOT #2 Comes with a working lock buy I only have one F50 key to

 

Bank in very good condition. We acquire our items from estate sales and auctions; therefore, most items are used and we will note any problems. We offer combined and discounted shipping costs for auct